ProduktbeskrivelseSemi-matt, PU reinforced acrylic floor varnish. Rich with good coalescence, extra durability and scratchproof.
Planlæg - AnvendelseFor all types of wood in living rooms, corridors, entries, stairwells, offices and kitchens. The surface must be treated with varnish primer or have been previously varnished.
UnderlagMust be clean, dry, firm and suitable for surface treatment.
FremgangsmådeRemove uneven or peeling varnish and paint completely down to the clean wood by sanding.
Prime untreated wood using Floor Primer.
Clean existing varnish for dirt, grease and wax using Wood Cleaner.
Sand to matt finish but not too deep.
Vacuum clean and dry with a hard-wrung cloth.
Best durability is achieved with 2 or more treatments.
PåførBrush or roller.
Decide on your mode of application according to the desired finish.
Apply wet on wet and finish by brushing/rolling in the same direction, avoid overlap and varnish-pools.
Always use the same batch number on contiguous/unbroken surfaces.
Differences in surface structure can result in a deviation in gloss.
Cold/heat can affect the viscosity of the material.
Condensation must be prevented during drying/curing.
Cold and increased humidity extends drying time, full curing and recoat interval.
Increased temperature and low atmospheric humidity reduce drying time and full curing.
Wood floors must have balanced moisture when undergoing treatment.
Check adhesion by pressing a coin perpendicularly against the varnished surface.
Always perform a test treatment for a check and acceptance of adhesion and result
Opbevaring: Cool, frost free and tightly closed